Products
Replacement wear parts for excavators and loaders. Every part is supplied to order: send the machine model or part number and we confirm fitment in writing before quoting.
Undercarriage parts
Track rollers, carrier rollers, idlers, sprockets, track chains and track shoes.
Track roller (bottom roller)
Track rollers carry the weight of the machine and guide the track chain along the bottom of the track frame. They are replaced when the tread or flanges are worn or the seals leak.
Carrier roller (top roller)
Carrier rollers support the track chain on its return run along the top of the track frame.
Front idler
The idler guides the track chain at the front of the undercarriage and, together with the recoil spring, keeps the track tensioned.
Sprocket and drive segments
The sprocket transfers drive from the final drive to the track chain. Worn teeth speed up bushing wear, so sprockets are usually changed together with the chain.
Track chain (track link assembly)
The track chain is the assembly of links, pins and bushings that the track shoes bolt onto.
Track shoe (track pad)
Track shoes bolt onto the chain and make the contact with the ground. Width and grouser pattern are chosen for the ground conditions.
Rubber tracks and pads
Rubber tracks for mini excavators and compact track loaders, and rubber pads for steel tracks.
Rubber track
One-piece rubber tracks for mini excavators, compact track loaders and tracked carriers. A track is replaced when the lugs are worn down, the steel cords are exposed or the rubber is cut through.
Rubber track pad
Rubber pads fit over or in place of steel track shoes so a steel-tracked excavator can work on asphalt and concrete without marking the surface.
Bucket teeth and wear parts
Bucket teeth, adapters, pins and retainers, cutting edges and side cutters.
Bucket tooth
Bucket teeth take the wear at the cutting edge of the bucket. The tooth shape is chosen for the material: standard teeth for soil, rock teeth for hard or abrasive ground.
Tooth adapter
The adapter is welded or bolted to the bucket lip and holds the tooth.
Tooth pin and retainer
The pin and retainer lock the tooth onto the adapter. They should be replaced with every new set of teeth.
Hydraulic breaker parts
Chisels, seal kits, bushings, through bolts and diaphragms for hydraulic breakers.
Hydraulic breaker chisel (tool)
The chisel is the working tool of a hydraulic breaker and the part that wears fastest. The tip is chosen for the job: moil point for general breaking, flat chisel for trenching and cutting, blunt tool for secondary breaking of boulders.
Hydraulic breaker seal kit
A seal kit contains the seals and O-rings needed to reseal one breaker. It is normally changed at a fixed service interval or when oil leaks at the tool or the cylinder.
Breaker bushings, bolts and diaphragms
The other regular wear and service parts of a hydraulic breaker: front and inner bushings, through bolts and side bolts, tool pins and accumulator diaphragms.
Hydraulic seals
Seal kits for boom, arm and bucket cylinders, swing motors and main pumps.
Filters
Oil, fuel, air and hydraulic filters matched to engine and machine model.